Quadcopter-Robotics

I called it "repaired" and screwed body back together. It was only on the bench for one week. I upgraded to MissionPlanner 1.3.1...

Repaired (red led) ESC and it tests good. Saved some down time and $35. I am using (normal) leaded solder and have iron set to 360c. No...

The good news is that all electronics seem to still be working . On the bench, I connected a LiPo and used the Taranis and DroidPlanner. I c...

I lucked out and just managed to get IceCreamSandwich 4.x installed on my old (circa 2012 with GingerBread 2.x) Chinese Android 7" tabl...

At the small neighborhood field and light winds. Overcast skies. After making sure Nova would take-off and land ok, I did the AutoTrim pro...

Since ... - FC boards have been completely unplugged, removed, soldered on, and re-installed. - FC, RX, and GPS Module re-mounted (with ne...

For the following reasons, I have decided to re-assign my available radio channels: - I don't plan on installing a gimbal any time soon...